NEWS 20 November 2026

Wim van der Hoek Award 2026 goes to Cathal O’Neill (Fontys) and Michiel Collignon (TU/e)

A first: Bachelor and Master Awards presented. During the 25th edition of the Precision Fair, in Den Bosch, the Wim van der Hoek Award for the best graduation project was presented under the auspices of DSPE (Dutch Society for Precision Engineering).


This year, the jury introduced two separate awards to account for the differences in context between bachelor’s and master’s degree programmes. The Bachelor Award was presented to Cathal O’Neill (Fontys University of Applied Sciences, Eindhoven), and the Master Award went to Michiel Collignon (Eindhoven University of Technology, TU/e).

The second day of the Precision Fair 2026, Thursday 19th November in Den Bosch (NL), featured the presentation of the Wim van der Hoek Award. This award (also known as the Constructors Award) was introduced in 2006 to mark the 80th birthday of the Dutch doyen of design engineering principles, Wim van der Hoek (1924-2019). The Constructors Award is presented every year to the person with the best graduation project in the field of design in mechanical engineering at a Dutch or Belgian university of technology (TU) or university of applied sciences (UAS). This award includes a certificate, a trophy made by the Leidse instrumentmakers School and a sum of money, sponsored by JPE, Vervos en MaromeTech (Bachelor Award) and TU/e’s Casimir Institute (Master Award).

Seven nominations

Criteria for the assessment of the graduation theses include the quality of the design, its substantiation and innovativeness, as well as its suitability for use as teaching material. The seven nominations selected by the jury this year came from TU/e and Fontys and HAN (Arnhem/Nijmegen) UAS. The jury was chaired by DSPE board member Jos Gunsing (MaromeTech) and included Hans Steijaert (Vanderlande), Maurice Teuwen (JPE), Marc Vermeulen (ASML), Johan Vervoort (Vervos) and Wouter Vogelesang (VH Consult).

Two awards

Starting this year, the Wim van der Hoek Award will consist of two separate distinctions, the jury reports. “One award for the best bachelor’s thesis and one for the best master’s thesis, both focusing on the application of design principles. This change acknowledges the distinct structure, educational objectives, and opportunities for in-depth study inherent to each degree track. The growing number of bachelor’s-level submissions has also prompted this shift. By offering separate awards, the specific merits of both bachelor’s and master’s theses can be recognised within the context of their respective academic programmes.”

The core criteria for the award remain unchanged, the jury states. “The award serves to recognise the student, as well as the contributions of the supervising lecturer and the educational institution. Through the Wim van der Hoek Award, we underscore the importance of design principles as the foundation for well-conceived mechanical and mechatronic designs. In doing so, we aim to promote the preservation and transfer of this essential design knowledge, and to foster its continued integration within both technical education and professional design practice.

Bachelor Award

The Wim van der Hoek Bachelor Award 2026 was presented to Cathal O’Neill (Fontys UAS). His graduation project focused on the design of a kinematic X/Y manipulator and a glovebox system for handling lithium samples. In his work, he demonstrated an exceptional application of design principles, skilfully combining precision engineering, kinematics, contamination control, and manufacturability into elegant, well-founded design solutions. The jury noted that his work reached a high level of structural sophistication, characterised by its complexity and completeness with respect to the physics involved.

“Cathal frequently ventured beyond the traditional boundaries of his own field; as a mechanical engineer, he held his own in an environment dominated by demanding physicists,” the jury remarked. “He demonstrated a strong aptitude for systems thinking, approached requirements pragmatically, and delved deeply into a wide range of aspects. All of this makes his bachelor’s project truly high-calibre – especially considering the limited time available. Both the content and the presentation of his report clearly demonstrate his mastery of the subject matter and the discipline.”

Master Award

The Wim van der Hoek Master Award 2026 was presented to Michiel Collignon (TU/e). His graduation project involved a conceptual study of a mechatronic system for positioning a parallel overlay sensor array. He systematically and objectively evaluated various potential solutions, employing methodologies such as dynamic error budgeting. This allowed him to identify potential sources of error and dynamic effects in advance, enabling him to effectively steer the development toward the optimal mechatronic system architecture. According to the jury, he succeeded in incorporating a great deal of functionality into a very compact space.

“Michiel has reduced complexity to simplicity in an ingenious and systematic way,” the jury noted. “From the very beginning, he followed an excellent iterative and structured approach, consistently exploring various facets of multidisciplinary topics while also paying close attention to manufacturability.” Or, as his supervisor put it: “Michiel has proven that he possesses the quintessential designer’s DNA. He strictly applied classic Dutch design principles while maintaining a sharp focus on industrial application.”

Wim van der Hoek Award. FOTO: BRAM SAEYS

The winners of the Wim van der Hoek Master Award 2026, Michiel Collignon (left), and the Wim van der Hoek Bachelor Award 2026, Cathal O’Neill, holding the certificate and trophy that go with the prize. (Photo: Bram Saeys / Mikrocentrum)


References ...

Theo Ruijl (MI-Partners) receives Rien Koster Award

Researcher, designer, and architect at the edge of the possible. During the 25th edition of the Precision Fair, the Rien Koster Award was presented for the eleventh time under the auspices of the DSPE (Dutch Society for Precision Engineering).

Read more
Wim van der Hoek Award 2026 goes to Cathal O’Neill (Fontys) and Michiel Collignon (TU/e)

A first: Bachelor and Master Awards presented. During the 25th edition of the Precision Fair, in Den Bosch, the Wim van der Hoek Award for the best graduation project was presented under the auspices of DSPE (Dutch Society for Precision…

Read more
Wim van der Hoek’s Design Principles – Applying and Extending his Legacy

During the Precision Fair in Den Bosch (NL) on November 19, DSPE will host the “Wim van der Hoek’s Design Principles – Applying and Extending his Legacy” colloquium.

Read more