Events

Course Opto – Mechanical System Design

After 2 succesful editions we organise a third course 27, 28 and 29 September in 2021. The course focuses on the mechanical…

DSPE Conference 2021 on Precision Mechatronics September 14 & 15

“Good re-union and meeting new people, great balance between listening and networking, fun, entertaining, very constructive, new developments, received a lot of…

Lunch Lecture May hosted by JPE – driven by innovation

This DSPE Lunch Lecture is hosted by JPE – Driven by innovation and has the title “Tackling thermal contacts – Estimation and measurement…

Lunch Lecture April hosted by Philips Innovation Services

Identification & Control of Thermo-Electric-Coolers Consumer electronics, and professional equipment alike, become increasingly reliant upon the ability for precise thermal management. As…

Knowledge day Topology Optimization Part 2

In complex engineering problems, particularly with multiphysics, the multitude of boundary conditions quickly becomes too much for a single engineer to oversee.…

Knowledge day Topology Optimization day 1

In complex engineering problems, particularly with multiphysics, the multitude of boundary conditions quickly becomes too much for a single engineer to oversee.…

Lunch lecture March hosted by SRON

Development of the SPEXone spectropolarimeter instrument, the Dutch contribution to the NASA PACE satellite observatory   By Alexander Eigenraam, senior mechanical design…

Lunch Lecture February hosted by Demcon

  This DSPE Lunch Lecture on february the first is hosted by Demcon and is about “DemcAir – Project under Pressure”. The…

Lunch Lecture January hosted by VDL ETG

 By Hünkar Kemal Yurt, mechatronics system design engineer at VDL ETG VDL ETG is responsible to develop precise mechatronic handler systems for…

Lunch Lecture MI- Partners

DSPE Lunch Lecture by Elwin Boots, Senior mechatronic system designer at MI-Partners Elwin will introduce the magnetically mounted “through-wall” stage, which he…

Call for short abstracts

This will be the first Special Interest Group meeting on Precision Motion Systems & Control.

ASPE 2020 Spring Topical Meeting

Oak Ridge National Laboratory Manufacturing Demonstration FacilityKnoxville, Tennessee, USA   Short Abstracts due April 3, 2020   Co-Chairs:John S. Taylor, University of…

Gala Dinner Martin van den Brink Award

Dear all, The Martin van den Brink Award originally planned June 4, 2020 will be postponed until such an event is possible…

ASPE 2020 Spring Topical Meeting

Massachusetts Institute of Technology Cambridge, Massachusetts, USA Meeting Co-chairpersons David L. Trumper, Massachusetts Institute of Technology Chinedum Okwudire, University of Michigan Dick…

Aachen Polymer Optics Days

Aachen, Germany   Program with 4 exciting topics:   Materials in optics manufacturing Tool and mold making for optical applications Injection molded…

3-DAY COURSE Optomechanical System Design

Unfortunatelly this course is already full.   Optomechanical system design is a truly multidisciplinary expertise that combines optical, mechanical, mechatronic, thermal, electrical,…

Precision Fair 2019

 On 13 and 14 November 2019, the successful Precision Fair takes place. This event is free accessible and takes place at NH…

115 Year LiS reunion

Donderdag 17 oktober 13.30u – 18.30u Anual Symposium   Thema: Manufacturing readinessLocatie: LiS, Einsteinweg 61, 2333 CC Leiden    This time the…

Course Optomechanical System Design

The three-day course has reached the maximum number of participants.Please send a message to info@dspe.nl to be on the waiting list. Beginning…

DSPE Optics Week 2019

• 30 september – DSPE Optics and Optomechanics Symposium + Fair • 1 – 2 – 3 October – 3-DAY COURSE Optomechanical…

Photonics Application Week

September 30- October 4 Our OpticWeek.eu is part of this Photonics Applicaitons Weekin the city of Eindhoven.   About Photonics Applications Week…

Knowledge Day Engineering for Particle Contamination Control

Euspen International Conference & Exhibition

18th euspen‘s international conference and exhibition provides a leading forum for industrialists and academics alike to review the best of world-wide industrial…

President DSPE becomes lecturer in the research domain of Smart Manufacturing & Integrated Systems.

Onderwijs Zoek, Onderzoek Wijs | Education Search, Research Educate   Inauguration of Hans Krikhaar as olecturer (lector) in the research domain of…

Precision in Business Day at NTS Campus

MATLAB EXPO 2019

One of our members is organising MATLAB EXPO in Eindhoven. You will learn about the latest product capabilities in MATLAB® and Simulink®,…

High Tech Systems 2019

High-Tech Systems is a conference with the focus on high-end system engineering and disruptive mechatronics. The conference programme focuses on high-end system…

Gas Bearing Workshop 2019

PROGRAM flyer     This  third workshop shall bring together, – manufacturers and vendors of gas bearing components– companies employing gas bearings–…

Symposium Magnetoresistive Sensors and Magnetic System

15th Symposium “Magnetoresistive Sensors and Magnetic Systems”                       19./20. March 2019 in Wetzlar,…

YPN visist Thermo Fisher Scientific Electron Microscopy Solutions

Euspen LANDAMAP 2019

Lecture of prof Marty Culpepper of MIT

Precision Fair 2018

 On 14 and 15 November 2017, the 18th edition of the successful Precision Fair takes place. This event is free accessible and…

European Optical Society Biennial Meeting (EOSAM) 2018

Venue TU Delft Aula Conference Center, Delft, the Netherland   Important dates Submission timeframe: 1 December 2017- 15 April 2018 Informing authors…

Precision in Business Day at Punch Powertrain

Punch Powertrain: Supplier of high precision drive trains   Precision is not only to be found in delicate equipme nt and machinery. Also…

Precision Engineering in the last 40 years

Especially for the relations of the TU/e High Tech Systems Center and the Dutch Society for Precision Engineering we organised this seminar,…

DSPE conference on precision mechatronics 2018

The 4th DSPE conference on precision mechatronics took place on September 4-5, 2018 at the inspiring conference location De Ruwenberg in Sint…

YPN visits Bosch Rexroth

YPN                                          …

Euspen 18th International Conference & Exhibition

euspen’s international conference and exhibition provides a leading forum for industrialists and academics alike to review the best of world-wide industrial innovation,…

Dutch Machine Vision Conference

Venue Van der Valk Eindhoven This completely new conference focusses on trends in machine vision technology and offers a strong programme of…

Aachen Polymer Optics Days 2018

Aachen Polymer Optics Days (April 10-11, 2018) Experts from industry and research will give inspiring lectures relating to manufacturing options and potential…

PIB visits ASML – visitors report

Several times a year DSPE members are invited for a Precision in Business (PiB) Day with different technical themes.   ASML is…

From macro to micro

Vision Expert Day 2018

High Tech Systems 2018

One day conference and exhibition with the focus on hightech systems and key enabling technologies. The conference programme of the fifth edition…

High Tech meets Testing

Can you develop an excellent product without testing? How do you test your product without all details being known yet? Are you…

Precision Fair 2017

euspen Special Interest Group Meeting: Micro/Nano Manufacturing

University of Strathclyde, Glasgow UK   Micro- and nano-scale manufacturing has been the focus of extensive of research for well over 2…

Annual Meeting American Society for Precision Engineering ASPE

32th edition of the Annual Meeting of the ASPE. Conference Chair: Vivek G. Badami, Zygo Corporation   The Westin CharlotteCharlotte, North Carolina,…

DSPE Optics and Optomechanics Week 2017

• 23 October – DSPE Optics and Optomechanics Symposium + Fair • 24 October – Demonstration Day at Fraunhofer Institute • 24 –…

Symposium From Measuring to Knowledge

Especially for alumni of the Leidse instrumentmakers School (LiS),   14.00 – 18.30  Speakers: 1) Jan Sturre of Heidenhain with “Direct position…

euspen Special Interest Group Meeting: Additive Manufacturing

Dimensional Accuracy and Surface Finish from Additive Manufacturing.   10th – 11th October 2017 Location: KU Leuven, BE     · Keynote…

Face2Phase conference Delft

Knowledge Session 3D Printing. What could be in it for me?

VISIT to German Optics Networks in Wetzlar and Aachen

Last november, members of the German optics network visited South Netherlands OPTENCE to get to know the networks DSPE and Brainport Industries.…

Knowledge Session Design in Vacuum

EPHJ-EPMT-SMT 2017, International trade fair for the high-precision industry, Geneva

 The EPHJ – EMPT – SMT brings together professionals from the watchmaking-jewellery, micro-nano and medical industries. It is the leading showcase event…

Euspen International Conference & Exhibition

17th euspen‘s international conference and exhibition provides a leading forum for industrialists and academics alike to review the best of world-wide industrial…

ASQ Fontys 2017

14:30-18:30 uur   Fontys voert veel praktijkgericht onderzoek uit en innoveert volop in de High Tech. Studenten en docent-onderzoekers en bedrijven tonen…

High Tech meets Design

The next gear towards creative innovation   The strong design and high tech scene in Eindhoven creates impressive concepts where these two…

Ultra Precision Conference 2017

Organised by the Cambridge and Cranfield MRes cohort of the Centre for Doctoral Training in Ultra Precision Engineering, this event will take…

Start up & Innovation Square at Hannover Messe

The Innovation square covers an area of 100M2 of exhibition space in Hall 4 (location of system suppliers and industrial supply) with…

Robotics Week 2017

YPN visits Heidenhain 2017

YPN                                          …

YPN visits Heidenhain 2017 – visitors Report

YPN                                          …

PIB visits MECAL

Predictive modelling has become an important part of the engineering toolbox. For MECAL it has been core competence for over 25 years.…

High Tech Systems 2017

One day conference and exhibition with the focus on hightech systems and key enabling technologies. The conference programme of the fourth edition…

YPN visits ASML

YPN                                          …

Precision Fair 2016

The Precision Fair 2016 is at NH Conference Centre Koningshof, Veldhoven, on 16 & 17 november 2015 from 9.30AM tot 17PM.  …

DSPE General Member’s Meeting

MEMBERS ONLY At the Precision Fair, the DSPE will organize the ALV, the DSPE General Member’s Meeting, November 16, 10.30-12.00, conferenceroom 81…

115 Year LiS reunion

Association for the promotion of the training to instrument maker likes to invite old pupils    14 – 18.30 Location: Gorlaeus college zaal,…

DSPE Conference 2016

PIB visits TEGEMA – visitor report

Euspen 16th International Conference & Exhibition

EUROPEAN CRYOGENICS DAYS at CERN

Matchmaking and Conference This event aims to explore the subject of Cryogenics and its developments at CERN and showing the impact of…

Euspen 16th International Conference & Exhibition

euspen’s international conference and exhibition provides a leading forum for industrialists and academics alike to review the best of world-wide industrial innovation,…

Gala Dinner Martin van den Brink Award

Members of DSPE and Brainport Industries can participate as a partner and buy a dinertable at cost. Relations can be invited in…

Robocup European Open 2016

RoboCup is a worldwide project with the aim of building a soccer playing robot that looks like a human and will be…

High Tech Systems 2015

One day conference and exhibition with the focus on hightech systems and key enabling technologies The conference programme of the fourth edition…

EUSPEN Special Interest Group Meeting: Thermal Issues

Thermal effects are regarded as a major contributor to errors on machine tools, on measuring equipment and on workpieces. Measurement of thermal…

ESEF Trade fair – Tomorrow’s Technology Today

ESEF is 15 – 18 March 2016 in the Jaarbeurs Utrecht.     You can apply for free and are welcome each day…

Open Window of the Future of Smart Optics Systems

On behalf of prof.dr.ir. Michel Verhaegen and prof.dr. Gleb Vdovin of the Delft Center for Systems and Control we herewith invite you…

Open Meeting Advanced Thermal Control consortium

High Tech Campus Eindhoven, 14:00 till 17:30   A group of leading industry and academics from the Dutch high tech sector took…

YPN visits 2016 Maxon Motor and Biomass Technology Group

YPN                                          …

PIB visits ASML – visitors Report

Report on the Precision-in-Business Day: ASML   On the 1st of December 2016, YPN paid a visit to ASML in Veldhoven. First,…

YPN visits 2016 VDL ETG

EUSPEN Micro/Nano Manufacturing Workshop

The emergence of products based on micro and nano technology has increased during the last two decades.           …

SYMPOSIUM Post graduate education in precision engineering

Precision Fair 2015

The Precision Fair 2015 is at NH Conference Centre Koningshof, Veldhoven, on 18 & 19 november 2015 from 9.30AM tot 17PM uur.…

High-Tech opportunities in Taiwan information session

Location Brainport Development, Emmasingel 11, Eindhoven (meeting room WORLD)   Guy Wittich, representative of the Netherlands Trade & Investment Office will give…

Annual Meeting American Society for Precision Engineering ASPE

30th edition of the Annual Meeting of the ASPE. Till June 1 you can submit your paper for a poster presentation  …

Precision in Business day at VDL ETG

It is not possible anymore to register for this PiB day. We reach the max of 40.   PROGRAM 13.30 Arrival and…

PIB visits VDL ETG – visitors Report

Report on the Precision-in-Business Day: VDL ETG On October 8th, VDL Enabling Technologies Group (ETG) in Eindhoven hosted a well-attended (65 people)…

PIB visits VDL ETG – visitors Report

Report on the Precision-in-Business Day: VDL ETG On October 8th, 2017 VDL Enabling Technologies Group (ETG) in Eindhoven hosted a well-attended (65…

DSPE Optics and Optomechatronics Week 2015

28 September – DSPE Optics and Optomechatronics Symposium 201529 – 30 September – Course Optomechanics (2 days)29 – 30 September and 1…

YPN visit 2015 NTS Group

YPN visits NTS-Group Eindhoven

The NTS-Group develops, manufactures and optimises opto-mechatronic systems, modules and components for international machine builders (OEMs).The NTS-Group comprises different, complementary operating companies…

EMLC2015